Frictional force analysis of stent retriever devices using a realistic vascular model: Pilot study

초록

Objective: To date, no vascular model to analyze frictional forces between stent retriever devices and vessel walls has been designed to be similar to the real human vasculature. We developed a novel in vitro intracranial cerebrovascular model and analyzed frictional forces of three stent retriever devices. Methods: A vascular mold was created based on digital subtraction angiography of a patient's cerebral vessels. The vascular model was constructed using polydimethylsiloxane (PDMS, Dow Corning, Inc.) as a silicone elastomer. The vascular model was coated on its inner surface with a lubricating layer to create a low coefficient of friction (similar to 0.037) to closely approximate the intima. A pulsatile blood pump was used to produce blood flow inside the model to approximate real vascular conditions. The frictional forces of Trevo XP, Solitaire 2, and Eric 4 were analyzed for initial and maximal friction retrieval forces using this vascular model. The total pulling energy generated during the 3 cm movement was also obtained. Results: Results for initial retrieval force were as follows: Trevo, 0.09 +/- 0.04 N; Solitaire, 0.25 +/- 0.07 N; and Eric, 0.33 +/- 0.21 N. Results for maximal retrieval force were as follows: Trevo, 0.36 +/- 0.07 N; Solitaire, 0.54 +/- 0.06 N; and Eric, 0.80 +/- 0.13 N. Total pulling energy (N.cm) was 0.40 +/- 0.10 in Trevo, 0.65 +/- 0.10 in Solitaire, and 0.87 +/- 0.14 in Eric, respectively. Conclusions: Using a realistic vascular model, different stent retriever devices were shown to have statistically different frictional forces. Future studies using a realistic vascular model are warranted to assess SRT devices.

키워드