Effect of the subsidiary materials of the manufacturing process on the microstructure of the composite laminate

초록

Composite specimens with resin contents of 33.5%, 35.4%, and 35.9%, respectively, were manufactured by controlling the type of subsidiary material used in the bagging process for a composite material having the same composition. The effect of controlling the resin content on the microstructure and mechanical properties of composite specimens was investigated. The flow of resin and air during the cure process was inferred and explained by connecting it with the microstructure. Specifically, the behavior of the resin determined the thickness, density, and void of the composite laminate, which acted as a factor causing the difference in mechanical properties of the composite materials. As the resin content increased, there was no significant difference in tensile strength, but Young's modulus decreased. In the case of the compression test, there was a difference in mechanical properties due to the combined effect of the reinforcement and the resin. The maximum compressive strength value was shown in the process with low void content, and Young's modulus tended to decrease as the resin content increased. In the bagging process, the subsidiary material controlled the flow of resin and air, and caused a difference in microstructure, affecting the change of mechanical properties.

키워드