Restoration Temperature Control through Glass Transition Temperature Modulation of Shape Memory Polymer for Thermally Switchable Adhesive

초록

Shape memory polymers (SMPs) undergo changes between arbitrary shapes and programmed shapes upon exposure to specific stimulus, allowing them to restore their original shape. All kinds of external stimuli have a threshold to change the shape of the SMP. Especially, for the thermal type SMP, the critical temperature for shape restoration is typically near the glass transition temperature (Tg). In this study, the controllability of the restoration temperature is analyzed by adjusting the Tg of the polymer using Norland Optical Adhesive 63, which can be cured with UV irradiation. By varying the ambient temperature from 20 to 120 degrees C during UV exposure, Tg changes ranging from 35.84 to 50.50 degrees C are obtained, with corresponding changes in restoration temperature. As a practical application, a thermal-activated SMP dry adhesive is developed with programmable Tg and switchable adhesion. The fabricated SMP dry adhesive exhibited strong adhesion to substrates with various surface roughness. Additionally, the shape memory effect allowed for easy detachment through shape recovery, and different adhesive performances at different temperatures are achieved by programming various Tg values. Moreover, the simple manufacturing process of the SMP dry adhesive is confirmed to be suitable for continuous fabrication processes based on roll-to-roll methods. A shape memory polymer dry adhesive with a micro-lens pattern demonstrates adjustable adhesion through the shape memory effect. It adapts to various manufacturing conditions, altering its glass temperature, and adheres effectively to rough surfaces. Continuous fabrication akin to roll-to-roll processing is suggested. image

키워드